TECHNICAL DATA
| VOLTAGE | 230 V single fase |
| SAFETY | Double insulation |
| POWER | 1400W (+350W with AE151) |
| AMPS | 5.8 A |
| SIZES | 120 x 98 cm (160 x 98 cm withAE151) |
| WEIGHT | 12 Kg (+4 Kg con AE151) |
PANNEL POSITION
It is advisable to position the panel between a minimum of 10 cm to a maximum of 15 cm away from the surface to be irradiated.
INSTRUCCIONES
The drying time can be set from 0 to 99 min.
Plug the timer into the outlet 230V, the timer will activate and illuminate the display.
Turn on the main switch on the left side of the timer to activate the large panel.
If you wish to also use the optional panel “veil”, always turn on the secondary switch on the left side.
Turn the center knob clockwise to set the time of processing. The display will show the time in progressively digits (minutes). .
Press the center knob to start the timer. The display will show the countdown.
Reached the preset time, the timer will issue an acustic signal announcing the end of the work.
Plug the timer into the outlet 230V, the timer will activate and illuminate the display.
Turn on the main switch on the left side of the timer to activate the large panel.
If you wish to also use the optional panel “veil”, always turn on the secondary switch on the left side.
Turn the center knob clockwise to set the time of processing. The display will show the time in progressively digits (minutes). .
Press the center knob to start the timer. The display will show the countdown.
Reached the preset time, the timer will issue an acustic signal announcing the end of the work.
